611-15-1-1-N-70-CBC-JB 611 Series Level Transmitter

611-15-1-1-N-70-CBC-JB 611 series Options Accessories

611-15-1-1-N-70-CBC-JB NOSHOK, Inc. 70 ft Cable Length Small Diameter Submersible Level Transmitter

Item #: 461006421

Availability:

Hydrostatic level measurement for use in applications including bore holes and wells with small diameters (outer diameter 0.87")
Low power output signals for battery-powered applications, and optional temperature output available
5:1 turndown using optional HART® signal

Type	Submersible Level Transmitter
Pressure Range	36.6 ftH₂O 0 to 15 psig
Operating Temperature [Max]	80°C 176°F
Operating Temperature [Min]	-40°C -40°F
Housing Material	316 Stainless Steel
Optional Housing Material	318 LN
Output Signal	4 mA to 20 mA, 2-wire
Accuracy	± 1.0 of span
Optional Accuracy	± 0.5 of span
Note for Accuracy	Includes non-linearity, hysteresis, zero offset and end value deviation per IEC 61298-2 Accuracy after turndown via HART®, ≤ ±1.25% of scaled span (0.75% optional) Temperature sensor 14 °F to 176 °F (-10 °C to 80 °C): ≤ ± 3.3 °F.
Connection Type	Nosecone
Connection Material	316 Stainless Steel
Stability	≤ ± 0.1% of span per year
Measuring Element	Cap: Polyvinylidene Fluoride (PVDF) Sensor: 316 stainless steel, options Hastelloy C-276 Cable: Polyurethane, optional FEP
Power Requirement	4mA to 20 mA: 8 Vdc to 36 Vdc 4 mA to 20 mA and HART®: 12-36 Vdc 0.1 to 2.5 Vdc: 3.6 - 36 Vd
Load Limitations	4 mA to 20 mA: ≤ (Vpower - 8 V) / 0.022 A 4 mA to 20 mA and HART®: ≤ (Vpower - 9.6 V) / 0.022 A
Proof Pressure	5 Times Range
Compensated Temperature Range	0 to 80°C 32 to 176°F
Note for Compensated Temperature Range	Effect ± 0.01%/°F for zero and span
Media Temperature Range	-10 to 50°C 14 to 122°F
Optional Media Temperature Range	-40 to 80°C -40 to 176°F
Cable Length	70ft
Settling Time (Output Signals with HART®)	≤ 250ms
Settling Time (Output Signals without HART®)	≤ 100ms
Switch on Time (Output Signals with HART®)	≤ 250ms
Switch on Time (Output signals without HART®)	≤ 150ms
Submersion Depth [Max]	325 ft 100 m
Vibration According to (IEC) 60068-2-6	4 g
Service Life	< 100,000,000 full scale cycles
Electrical Connection	Standard polyurethane (PUR) Cable, Optional Water-Blocked PVC Cable (200+ psi only), Optional FEP Cable (38)
Degree of Protection	Ingress Protection (IP68)
Electrical Protection	Reverse polarity protection, short circuit and resistance to overvoltage :DC 40V and increased overvoltage for lightning protection. Normal discharge current ≤ 10 kA, Rise time 8/20 µs
Industry Standards/Certifications	European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Request for Information (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection
Warranty	3 Year

611-15-1-1-N-70-CBC-JB NOSHOK, Inc. 70 ft Cable Length Small Diameter Submersible Level Transmitter

Hydrostatic level measurement for use in applications including bore holes and wells with small diameters (outer diameter 0.87")Low power output signals for battery-powered applications, and optional temperature output available5:1 turndown using optional HART® signal

Type

Submersible Level Transmitter

Pressure Range

36.6 ftH2O0 to 15 psig

Operating Temperature [Max]

80°C176°F

Operating Temperature [Min]

-40°C-40°F

Housing Material

316 Stainless Steel

Optional Housing Material

318 LN

Output Signal

4 mA to 20 mA, 2-wire

Accuracy

± 1.0 of span

Optional Accuracy

± 0.5 of span

Note for Accuracy

Includes non-linearity, hysteresis, zero offset and end value deviation per IEC 61298-2Accuracy after turndown via HART®, ≤ ±1.25% of scaled span (0.75% optional)Temperature sensor 14 °F to 176 °F (-10 °C to 80 °C): ≤ ± 3.3 °F.

Connection Type

Nosecone

Connection Material

316 Stainless Steel

Stability

≤ ± 0.1% of span per year

Measuring Element

Cap: Polyvinylidene Fluoride (PVDF)Sensor: 316 stainless steel, options Hastelloy C-276Cable: Polyurethane, optional FEP

Power Requirement

4mA to 20 mA: 8 Vdc to 36 Vdc4 mA to 20 mA and HART®: 12-36 Vdc0.1 to 2.5 Vdc: 3.6 - 36 Vd

Load Limitations

4 mA to 20 mA: ≤ (Vpower - 8 V) / 0.022 A4 mA to 20 mA and HART®: ≤ (Vpower - 9.6 V) / 0.022 A

Proof Pressure

5 Times Range

Compensated Temperature Range

0 to 80°C32 to 176°F

Note for Compensated Temperature Range

Effect ± 0.01%/°F for zero and span

Media Temperature Range

-10 to 50°C14 to 122°F

Optional Media Temperature Range

-40 to 80°C-40 to 176°F

Cable Length

70ft

Settling Time (Output Signals with HART®)

≤ 250ms

Settling Time (Output Signals without HART®)

≤ 100ms

Switch on Time (Output Signals with HART®)

≤ 250ms

Switch on Time (Output signals without HART®)

≤ 150ms

Submersion Depth [Max]

325 ft100 m

Vibration According to (IEC) 60068-2-6

4 g

Service Life

< 100,000,000 full scale cycles

Electrical Connection

Standard polyurethane (PUR) Cable, Optional Water-Blocked PVC Cable (200+ psi only), Optional FEP Cable (38)

Degree of Protection

Ingress Protection (IP68)

Electrical Protection

Reverse polarity protection, short circuit and resistance to overvoltage :DC 40V and increased overvoltage for lightning protection. Normal discharge current ≤ 10 kA, Rise time 8/20 µs

Industry Standards/Certifications

European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Request for Information (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Warranty

3 Year

611-15-1-1-N-70-CBC-JB NOSHOK, 70 ft Cable Length Small Diameter Submersible Level Transmitter

Hydrostatic level measurement for use in applications including bore holes and wells with small diameters (outer diameter 0.87")
Low power output signals for battery-powered applications, and optional temperature output available
5:1 turndown using optional HART® signal

36.6 ftH₂O
0 to 15 psig

80°C
176°F

-40°C
-40°F

Includes non-linearity, hysteresis, zero offset and end value deviation per IEC 61298-2

Accuracy after turndown via HART®, ≤ ±1.25% of scaled span (0.75% optional)

Temperature sensor 14 °F to 176 °F (-10 °C to 80 °C): ≤ ± 3.3 °F.

Cap: Polyvinylidene Fluoride (PVDF)
Sensor: 316 stainless steel, options Hastelloy C-276
Cable: Polyurethane, optional FEP

4mA to 20 mA: 8 Vdc to 36 Vdc
4 mA to 20 mA and HART®: 12-36 Vdc
0.1 to 2.5 Vdc: 3.6 - 36 Vd

4 mA to 20 mA: ≤ (Vpower - 8 V) / 0.022 A
4 mA to 20 mA and HART®: ≤ (Vpower - 9.6 V) / 0.022 A

0 to 80°C
32 to 176°F

-10 to 50°C
14 to 122°F

-40 to 80°C
-40 to 176°F

325 ft
100 m