Per page:  

Item #: 753015545
Cable Marker Label
Plug component Nominal current: 20 A Rated voltage (III/2): 1000 V Number of positions: 3 Pitch: 7.62 mm Connection method: Crimp connection Color: green Corresponding female crimp contacts with current [A] and conductor cross section range [mm²] data: 13 5A/STG-MTN 0 5-1 0 (3190438); 13 5A/STG-MTN 0 5-1 0 BA (3190629); 20A/STG-MTN 1 5-2 5 (3190506); 20A/STG-MTN 1 5-2 5 BA (3190632). BA = Taped contacts
  • Crimp contacts available loose and on tape
  • Compatible with PC 4 headers for the PCB and DIN-rail mountable PCVK 4 and UPCV3K headers
  • Plug-in direction parallel to the conductor axis
  • Low design height of the PCC 4 series
  • Snap-lock option for pull-out aid
quantity

Item #: 753032328
Patch Cable
Plug component Nominal current: 12 A Rated voltage (III/2): 320 V Number of positions: 2 Pitch: 5 mm Connection method: Screw connection Color: green Contact surface: Tin
  • Well-known connection principle allows worldwide use
  • Low temperature rise
  • Allows connection of two conductors
  • Integrated double steel spring provides additional safety in the event of temperature and power fluctuations
quantity

Item #: 753032898
Industrial Ethernet Switch
Plug component Nominal current: 16 A Rated voltage (III/2): 320 V Number of positions: 6 Pitch: 5.08 mm Connection method: Spring-cage conn. Color: green Contact surface: Tin COMBICON connectors may only be activated under no load conditions. If for operating reasons small loads must be switched experimental values are available upon request.
  • Two integrated test connections
  • HC plugs may only be used with HC base strips
  • Coding profiles (CP) as protection against mismatching
  • Inverted versions with pin contact
quantity

Item #: 753017543
Patch Cable
Plug component Nominal current: 12 A Rated voltage (III/2): 320 V Number of positions: 2 Pitch: 5.08 mm Connection method: Screw connection Color: black Contact surface: Tin
quantity

Item #: 753025301
Sensor/actuator flush-type connector, plug, 12-pos., M12 SPEEDCON, shielded, A-coded, rear/screw mounting with M12 thread, with straight solder pins
quantity