2805402 Phoenix Contact VAL-MS 800/30 VF/FM
Surge arrester consisting of 2-channel base element with remote indication contact and protective plugs connected in series with a varistor and a gas-filled spark gap.
- For power supplies with higher supply voltages
- Consistent plug-in design
- Thermal disconnect device for each individual plug
- Optical, mechanical status indication for the individual arresters
- With or without floating remote indication contact
- Mechanical coding of all slots
2800419 Phoenix Contact PWT 35-800AC-FM
Lightning arrester in acc. with type 1/class I/B for 1-phase power supply networks with combined PE and N (L1 PEN) installed in one cable.
- Type 1 arrester based on a varistor
- Meets Lightning Protection Level I
- Universal solution for various network types
- Multi-stage status monitoring via remote indication contact
- Encapsulated, non-extinguishing
1840722 Phoenix Contact MC 1 5/ 4-ST-3 81 BD:1-4
Plug component Nominal current: 8 A Number of positions: 4 Pitch: 3.81 mm Connection method: Screw connection Color: green Contact surface: Tin
2926580 Phoenix Contact CABLE-D-37SUB/M/OE/0 25/S/1 0M
Shielded cable with a 37-pos. D-SUB pin strip and one open end. The individual wires are labeled 1 to 37 and fitted with ferrules. The braided shield is routed to a separate cable end. Cable length: 1 m.
- Individual wires fitted with ferrules
- D-SUB socket or pin strip at one end
- Open end at one end
2900747 Phoenix Contact BRIDGE- 3
3-phase loop bridge for 3 modules of the CONTACTRON family with 22.5 mm housing width.
- Only suitable for CONTACTRON series with screw connection
- Bridging of 2 to 10 devices with maximum module spacing of 22.5 mm
- Considerable reduction in wiring
2891767 Phoenix Contact FL SFP LX
SFP module with a data transmission speed of 1000 Mbps, a wavelength of 1310 nm, and a maximum transmission length of 30 km.
2700453 Phoenix Contact NLC-055-024D-08I-04QTP-00A
Optional communication modules provide network or serial connectivity. Optional Operator Panel provides user interface. Programming is via nanoNavigator.
2701040 Phoenix Contact NLC-IO-2AI-2AO-01
I/O extension module for use with Nanoline base unit. Equipped with 2 analog input (0...10 V DC -10...+10 V DC 0/4...20 mA) and 2 analog output (0...10 V DC 0/4...20 mA) channels. A maximum of three I/O extension modules can be attached to a base unit.
- A system may have up to 8 analog inputs and 8 analog outputs
- Automatically recognized by nanoNavigator
- I/O modules are electrically isolated
1452699 Phoenix Contact SACB-8/ 8-L- 5 0PUR SCO P
Sensor/actuator box Connection method: M12-SPEEDCON-socket Plastic Number of slots: 8 Number of positions: 4 Slot assignment: Single Status indication: Yes pnp; Master cable connection: Fixed connection 180° PUR/PVC Cable length: 5 m Shielding: No
- Safety in the field
- Molded housing and high degree of protection
- Flexible, distributed bundling of signals in one master cable
- Increased machine availabilityand easy diagnostics
- Save time