2859628 Phoenix Contact VAL-CP-175-ST
Item #: 753032108
Power Supply Unit
Type 2 arrester replacement plug (surge arrester) with high-capacity varistor with low leakage current.
Type 2 arrester replacement plug (surge arrester) with high-capacity varistor with low leakage current.
2859709 Phoenix Contact VAL-CP-N/PE-175-ST
Item #: 753032110
Jumper
Type 2 replacement arrester plug with N-PE spark gap
Type 2 replacement arrester plug with N-PE spark gap
2881887 Phoenix Contact FLT-CP-350-ST
Item #: 900129057
Sensor / Actuator Connector
Type 1 / Class I / B arrester (lightning arrester) replacement plug for paths L-N and L-PEN can be combined with FLASHTRAB compact series of products.
Type 1 / Class I / B arrester (lightning arrester) replacement plug for paths L-N and L-PEN can be combined with FLASHTRAB compact series of products.
2920528 Phoenix Contact VAL-MS/1+1-BE
Item #: 753031730
Wiring Bridge
Base element for type 2 arresters of the VALVETRAB MS product range. Version for 1-phase power supply with separate installation of N and PE conductors.
Base element for type 2 arresters of the VALVETRAB MS product range. Version for 1-phase power supply with separate installation of N and PE conductors.
- Versions with and without floating remote indication contact
- Single/multi-position design for accommodating protective plugs
- DIN rail module
- Coding when protective plug is inserted for the first time
2920531 Phoenix Contact VAL-MS/1+1-BE/FM
Item #: 753031723
Semiconductor Reversing Contactor
Base element for type 2 arresters of the VALVETRAB MS product range with remote indication contact. Version for 1-phase power supply with separate installation of N and PE conductors.
Base element for type 2 arresters of the VALVETRAB MS product range with remote indication contact. Version for 1-phase power supply with separate installation of N and PE conductors.
- Versions with and without floating remote indication contact
- Single/multi-position design for accommodating protective plugs
- DIN rail module
- Coding when protective plug is inserted for the first time
2800103 Phoenix Contact VAL-MS 230/2+0
Item #: 753031718
Cable Clamp
2-pos. rail-mountable surge arrester for 2+0 circuit thermal/dynamic monitoring and visual fault indicator.
Arrester rated voltage: 275 V AC.
2-pos. rail-mountable surge arrester for 2+0 circuit thermal/dynamic monitoring and visual fault indicator.
Arrester rated voltage: 275 V AC.
- Multi-channel type 2 arrester
- Type 2 surge arresters with consistent plug-in design
- Disconnect device on each individual plug
- Optical, mechanical status indication for the individual arresters
- With or without floating remote indication contact
- Mechanical coding of all slots
- Plugs can be checked with CHECKMASTER
2800106 Phoenix Contact FLT 25-400
Item #: 753032102
Bus Coupler
Type 1 / Class I / B arrester (lightning current arrester) with arc chopping spark gap 1-channel. Housing width: 17.5 mm (1 Div.)
Type 1 / Class I / B arrester (lightning current arrester) with arc chopping spark gap 1-channel. Housing width: 17.5 mm (1 Div.)
- High discharge capacity
- Single-channel
2800122 Phoenix Contact FLT-PLUS CTRL-2.5/I
Item #: 753040477
Safety Relay
Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics with control lamp quenching plates for high mains follow-through current quenching capacity 1-channel. Protection level: 2.5 kV. Housing width: 35 mm (2 Div.)
Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics with control lamp quenching plates for high mains follow-through current quenching capacity 1-channel. Protection level: 2.5 kV. Housing width: 35 mm (2 Div.)
- 1-channel
- Triggered
- High discharge capacity
- Good follow current quenching capacity with higher rated voltage
2800183 Phoenix Contact VAL-MS-T1/T2 335/12.5/3+1-FM
Item #: 753028994
Industrial Ethernet Switch
Universal varistor-based plug-in lightning arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV with remote indication contact.
Universal varistor-based plug-in lightning arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV with remote indication contact.
- Plugs can be checked with CHECKMASTER
- With or without floating remote indication contact
- Secure hold of plugs in the event of high lightning current loads and strong vibrations
- Optical, mechanical status indication for the individual arresters
- Thermal disconnect device for each individual plug
- Mechanical coding of all slots
2800184 Phoenix Contact VAL-MS-T1/T2 335/12.5/3+1
Item #: 753040565
Software
Universal varistor-based plug-in lightning arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV.
Universal varistor-based plug-in lightning arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV.
- Consistent plug-in design
- Secure hold of plugs in the event of high lightning current loads and strong vibration
- Thermal disconnect device for each individual plug
- Optical, mechanical status indication for the individual arresters
- With or without floating remote indication contact
- Mechanical coding of all slots