2800628 Phoenix Contact VAL-MS 1000DC-PV/2+V
Item #: 753040510
Antenna Cable
Surge arrester for 2-pos. isolated 1000 V DC voltage systems for DIN rail mounting 3-pos. base element three plug-in temperature-monitored protective elements status message on each plug.
Surge arrester for 2-pos. isolated 1000 V DC voltage systems for DIN rail mounting 3-pos. base element three plug-in temperature-monitored protective elements status message on each plug.
- Type 1 and type 2 arresters with consistent plug-in design
- Reliable contact
- Optical, mechanical status indication for the individual arresters
- With or without floating remote indication contact
- Mechanical coding of all slots
2800641 Phoenix Contact VAL-MS 600DC-PV/2+V-FM
Item #: 753040564
Sensor/Actuator Cable
Surge arrester for 2-pos. isolated 600 V DC voltage systems for DIN rail mounting 3-pos. base element with remote indication contact three plug-in temperature-monitored protective elements status message on each plug.
Surge arrester for 2-pos. isolated 600 V DC voltage systems for DIN rail mounting 3-pos. base element with remote indication contact three plug-in temperature-monitored protective elements status message on each plug.
- Type 1 and type 2 arresters with consistent plug-in design
- Reliable contact
- Optical, mechanical status indication for the individual arresters
- With or without floating remote indication contact
- Mechanical coding of all slots
2800642 Phoenix Contact VAL-MS 600DC-PV/2+V
Item #: 753040571
Antenna Cable
Surge arrester for 2-pos. isolated 600 V DC voltage systems for DIN rail mounting 3-pos. base element three plug-in temperature-monitored protective elements status message on each plug.
Surge arrester for 2-pos. isolated 600 V DC voltage systems for DIN rail mounting 3-pos. base element three plug-in temperature-monitored protective elements status message on each plug.
- Easy replacement
- Reliable contact
- Optimum inverter protection
- Efficient replacement of defective plugs
- Protection against mismatching
2800645 Phoenix Contact VAL-MS-T1/T2 335/12.5/4+0
Item #: 753040560
Power Supply
Plug-in varistor-based lightning arrester for 3-phase TN-S power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV.
Plug-in varistor-based lightning arrester for 3-phase TN-S power supply networks with separate N and PE (5-conductor system: L1 L2 L3 N PE) for Lightning Protection Levels III and IV.
- With or without floating remote indication contact
- Plugs can be checked with CHECKMASTER
- Secure hold of plugs in the event of high lightning current loads and strong vibrations
- Thermal disconnect device for each individual plug
- Mechanical coding of all slots
2800676 Phoenix Contact VAL-MS-T1/T2 175/12.5 ST
Item #: 753040548
Shrink Sleeve
L-N replacement plug for VAL-MS-T1/T2 175/12.5 plug-in lightning arrester.
L-N replacement plug for VAL-MS-T1/T2 175/12.5 plug-in lightning arrester.
2800749 Phoenix Contact VAL-SQ NP 120-2-A BE
Item #: 753040495
Safety Relay
The VAL-SQ NP surge protective device (SPD) provides whole-house surge protection in a panel-mount, pluggable form factor. A high-energy suppression circuit provides 32 kA of surge current protection per phase. Each surge suppression mode has over-current and thermal fusing for safety.
The VAL-SQ NP surge protective device (SPD) provides whole-house surge protection in a panel-mount, pluggable form factor. A high-energy suppression circuit provides 32 kA of surge current protection per phase. Each surge suppression mode has over-current and thermal fusing for safety.
- 32 kA surge current capacity per phase protects against high-energy lightning strikes and transient voltages
- Initial installation by a certified electrician
- LEDs provide continuous feedback on the status of each phase
- UL 1449 edition classified
2801041 Phoenix Contact VAL-MS-T1/T2 335/12.5/1+0
Item #: 753040579
Sleeve Housing
Universal varistor-based plug-in lightning arrester for single-phase power supply networks with common N and PE (2-conductor system: L1 PEN) for Lightning Protection Levels III and IV.
Universal varistor-based plug-in lightning arrester for single-phase power supply networks with common N and PE (2-conductor system: L1 PEN) for Lightning Protection Levels III and IV.
- Consistent plug-in design
- Thermal disconnect device for each individual plug
- Optical, mechanical status indication for the individual arresters
- Mechanical coding of all slots
2801042 Phoenix Contact VAL-MS-T1/T2 335/12.5/1+0-FM
Item #: 753040500
Sleeve Housing
Universal varistor-based plug-in lightning arrester for single-phase power supply networks with common N and PE (2-conductor system: L1 PEN) for Lightning Protection Levels III and IV with remote indication contact.
Universal varistor-based plug-in lightning arrester for single-phase power supply networks with common N and PE (2-conductor system: L1 PEN) for Lightning Protection Levels III and IV with remote indication contact.
- Consistent plug-in design
- Secure hold of plugs in the event of high lightning current loads and strong vibration
- Thermal disconnect device for each individual plug
- Optical, mechanical status indication for the individual arresters
- Mechanical coding of all slots
2801065 Phoenix Contact VAL-MS BE-AR
Item #: 753040533
Lightning/Surge Arrester
A common base element (VAL-MS BE-AR(/FM)) accommodates different plugs for different modes and levels of protection.
A common base element (VAL-MS BE-AR(/FM)) accommodates different plugs for different modes and levels of protection.
- Versions with and without floating remote indication contact
- Separate field and house wire termination
- Tool-free field wire disconnect and test point
- IP20 touch safe when connected
- Coding when protective plug is inserted for the first time
- Tested for railway applications
2801066 Phoenix Contact VAL-MS BE-AR/FM
Item #: 753040546
Extension Module
Base element for Type 1 and Type 2 surge arresters of the VAL-MS series with separate field and house termination tool-free isolation disconnect test point and remote indication contacts. Design: 1-channel bridgeable.
Base element for Type 1 and Type 2 surge arresters of the VAL-MS series with separate field and house termination tool-free isolation disconnect test point and remote indication contacts. Design: 1-channel bridgeable.
- Versions with and without floating remote indication contact
- Separate field and house wire termination
- Tool-free field wire disconnect and test point
- IP20 touch safe when connected
- Coding when protective plug is inserted for the first time