Force in kN @ 5 Bar at Stroke of 50% of Max Stroke
26.4
Force in kN @ 5 Bar at Stroke of Maximum Stroke
15.4
Material
2-Ply, High Strength Cord
AIRMOUNT ISOLATOR
Design Height (mm)
268
Load (at Design Height) at: 3 Bar (kN)
9.3
Load (at Design Height) at: 5 Bar (kN)
16.3
Load (at Design Height) at: 7 Bar (kN)
23.3
Natural Frequency (@5 Bar)(fn(Hz)
1.8
% of Isolation at Forced Frequency 7 Hz
92.8
% of Isolation at Forced Frequency 13 Hz
98.3
% of Isolation at Forced Frequency 25 Hz
99.5
W01-M58-6385 Firestone Air Spring
MROStop is an official Firestone Airide distributor, If you have any questions about the W01-M58-6385 Firestone Air Spring or any Firestone products, please call us at: 1(866)388-7558
MROStop, as an official Firestone Airide distributor, is fully equipped with training and knowledge about Firestone Airide's extensive range of Air Springs. We ensure that you get all the support you need when purchasing Firestone Airide Air Springs.
Firestone Air springs are crafted to surpass the toughest standards worldwide. We design and build our products to deliver countless miles of excellent, hassle-free performance. Our comprehensive approach to product innovation has led to the integration of automotive technology into our heavy-duty offerings. This commitment to excellence is what you'd expect from an industry leader.
Firestone Airstroke™ actuators are being used in industrial applications as pneumatic actuators that play important roles in some of the most innovative modern machine design. Because of the Airstroke™ actuators durability, resiliency in abrasive environments and overall performance, these actuators can serve as replacements in applications using traditional pneumatic and hydraulic cylinders.
AirStroke™ Advantages
Affordable
In most cases, the Airstroke initial cost is about 50% less than more conventional pneumatic or hydraulic cylinders with the same force capabilities. The larger the size equals a greater savings.
Wide Range
Airstroke actuators are made in sizes that go from 2.2 in. to 37 in. in diameter. The force capability is 100,000 lbs. with the possibility of strokes of up to 14 in.
Durability
Airstroke actuators share many of the same qualities as Firestone's legendary Airide springs for truck and bus suspensions. The resiliency needed for millions of miles with heavy duty suspension use is designed to withstand adverse environmental conditions and other harsh situations.
No Internal Rod, Piston, or Sliding Seals
Within the Airstroke actuators, there are no internal rods, pistons, or sliding seals like many of the conventional cylinders, this gives Airstroke™ the advantage in applications where dirt or grit would erode conventional cylinder seals.
No Friction
With the absence of sliding seals, the Airstroke actuators have no breakaway friction.
Flexible
An Airstroke actuator works with diverse medias, either a liquid or gas (Please see datasheet for acceptable media choices.)
Angular Capabilities
An Airstroke stroke through an arc without a clevis creating the possibility of angular motion of up to 30 degrees.
Side Loading Capabilities
Airstroke actuators, under certain conditions, are unaffected by side loads. This eliminates the chances for rod bending, scoring, and excessive seal wear, common issues when using a conventional cylinder.
Compact Starting Height
Airstroke actuators have a low profile compared to conventional cylinders. The smallest Airstroke actuator (2.2 in./dia.) collapses to just 1.1 in. in height, while our largest triple convoluted Airstroke (37 in./dia.) will collapse to a very compact 5.5 in.
Factory Tested
Airstroke actuators feature Firestone's proven concept of crimped end plates. The crimped design allows for pre-shipment testing and quicker installation on equipment.
