5606126 Phoenix Contact RAD-CAB-PFP500-25
Item #: 900062460
Wireless Module
Antenna cable 25 ft. in length type N (male) to type N (male) 50 Ω impedance
Antenna cable 25 ft. in length type N (male) to type N (male) 50 Ω impedance
2885919 Phoenix Contact RAD-ISM-2400-ANT-OMNI-6-0
Item #: 900073172
Installation Terminal Block
Omnidirectional antenna 2.4 GHz 6 dBi linear vertical N (female) IP55 50 Ohm impedance
Omnidirectional antenna 2.4 GHz 6 dBi linear vertical N (female) IP55 50 Ohm impedance
- For mobile applications with a longer range
- ATEX & IECEx approval
5606614 Phoenix Contact RAD-ISM-900-ANT-YAGI-10-N
Item #: 753035039
Solid State Relay Module
Yagi directional antenna 12.15 dBi gain 2 ft. RG-213 cable with type N (female) connector
Yagi directional antenna 12.15 dBi gain 2 ft. RG-213 cable with type N (female) connector
2861205 Phoenix Contact IB IL 24 MUX MA-PAC
Item #: 753023811
Safety Relay
Inline field multiplexer complete with accessories (plug and labeling field) transmission of very remote signals without configuration
Inline field multiplexer complete with accessories (plug and labeling field) transmission of very remote signals without configuration
- Up to 63 I/O terminals can be connected
- Up to 512 digital or 32 analog I/Os can be connected
2900100 Phoenix Contact RAD-WHA-1/2NPT
Item #: 900128474
Cable Marker
Adapter that can be used to interface HART field devices into a WirelessHART network.
Adapter that can be used to interface HART field devices into a WirelessHART network.
- Connected HART devices can transmit data via a WirelessHART network
- Removable antenna for connecting a coaxial cable and a high-gain antenna
- 1/2" NPT connection for distributed or direct device connection Up to 4 HART devices can be connected to one adapter
2867128 Phoenix Contact RAD-OUT-4A-I
Item #: 753021086
Connecting Cable
Extension modules can be connected to this system to adapt the number of signals to be transmitted to the requirements. The bus foot connector is used to supply the extension modules and establish communication via an internal data bus.
Extension modules can be connected to this system to adapt the number of signals to be transmitted to the requirements. The bus foot connector is used to supply the extension modules and establish communication via an internal data bus.
2867160 Phoenix Contact RAD-ISM-900-ANT-OMNI-0-6
Item #: 753021166
Bus System Flush Type Connector Assembly
2901533 Phoenix Contact RAD-DAIO6-IFS
Item #: 900172605
Lightning/Surge Arrester
Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input (0/4...20 mA) and output (0/4 ... 20 mA 0...10 V) with screw connection incl. DIN rail connector
Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input (0/4...20 mA) and output (0/4 ... 20 mA 0...10 V) with screw connection incl. DIN rail connector
- Channel-to-channel electrical isolation
- Easy module replacement even during operation
- Suitable for ATEX zone 2
- Easy start up via thumbwheel