Per page:  

Item #: 753040577
Filter Terminal Block
Single or two-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e according to EN ISO 13849, SIL 3 according to EN 62061, plug-in spring-cage terminal block.
quantity

Item #: 753036091
Surge Protection Plug
Single-channel contact extension with TBUS interface 4 N/O contacts 1 N/C contact 1 confirmation current path can be set with drop out delay of 0.5 - 30 sec. Cat. 3 PL e according to EN ISO 13849 pluggable screw terminal blocks width: 22.5 mm
  • Single-channel control|4 enabling, 1 signaling, and 1 confirmation current path, all with dropout delay
quantity

Item #: 753036092
Power Supply Unit
Single-channel contact extension with TBUS interface 4 N/O contacts 1 N/C contact 1 confirmation current path can be set with drop out delay of 0.5 - 30 sec. Cat. 3 PL e according to EN ISO 13849 pluggable spring-cage terminal blocks width: 22.5 mm
  • Single-channel control|4 enabling, 1 signaling, and 1 confirmation current path, all with dropout delay
quantity

Item #: 753036098
D-Sub Bus Connector
Two-channel speed and downtime monitor up to SIL 3 or Cat. 4 PL e according to EN ISO 13849 4 N/O contacts suitable for connecting incremental encoders and initiators plug-in spring-cage connection terminal blocks width: 45 mm
  • Standard sensors can be connected
  • Up to SIL 3 according to IEC 61508
  • Easy configuration via software
quantity

Item #: 753040511
Double Level Terminal Block
  • Easy proof test according to IEC 61508 thanks to integrated signal contact
  • Installation in zone 2 permitted
  • Couples digital output signals from fail safe controllers to Input/output devices for electrical isolation and power adaptation
quantity

Item #: 900119990
Sensor/Actuator Cable
Single-channel contact extension with TBUS interface 4 N/O contacts 1 N/C contact 1 confirmation current path undelayed Cat. 4 PL e according to EN ISO 13849 pluggable screw terminal blocks width: 22.5 mm
  • Contact Extension With PSR-TBUS Connection
  • 4 Enabling Current paths
  • 1 Signaling Current Path
quantity

Item #: 753040525
Lightning/Surge Arrester
  • Easy proof test according to IEC 61508 thanks to integrated signal contact
  • Installation in zone 2 permitted
  • Couples digital output signals from fail safe controllers to Input/output devices for electrical isolation and power adaptation
quantity

Item #: 753036094
Sensor/Actuator Cable
Single-channel contact extension with TBUS interface 4 N/O contacts 1 N/C contact 1 confirmation current path undelayed Cat. 4 PL e according to EN ISO 13849 pluggable spring-cage terminal blocks width: 22.5 mm
  • Contact Extension With PSR-TBUS Connection
  • 4 Enabling Current paths
  • 1 Signaling Current Path
quantity

Item #: 753039712
Base Unit
The safety module is an output module from the Inline product range, designed for use in an INTERBUS-Safety or PROFIsafe system. The safety module can be used as part of an Inline station at any point within an INTERBUS-Safety or PROFIsafe Inline system.
  • SIL 3 according to IEC 61508/EN 61508
  • SILCL 3 according to EN 62061
  • PL e according to EN ISO 13849-1
quantity